Special Reducer for Stone Machine

Special reducer for stone machine

WP series cast iron worm gear speed reducer WPW worm reducer gearbox
1. Smooth operation
2. Little verbiration
3. Low noise

Features:
1) Precision cast iron
2) Face of gear has been quenched and its profile has high accuracy
3) Compact structure and small volume saves mounting space
4) High overload capacity
5) Forward and backward running with frequent starting
6) Stable transmission with reduced vibration and noise

1. Notice of insallation
1.1 The base plate must be plane and stoutness and the base plate must be screwed down and shock proof.
1.2 The connecting shaft of prime mover, reducer and operation device must be coaxial installation.
1.3 The diameter tolerance zone of input and output shaft is H6, the holes of fittings must properly mate the shaft, which prevents bearing from breakage because of over-loose mate.
1.4 Drivers such as sproker wheel and gear must fitted close to bearing in order to reduce bending stress of handing shaft.
1.5 While assembling motor of WPD reducer. It is necessary that proper amount of butter applies to the warm shaft input hole and the keyway, avoiding assembling too tightly and rusting after using for a long time
1.6 When ordering of all using all kinds of wpd type, if the motor weight is binger than the common, supporting set is required.
2 notice of usage
2.1 Before using, please check carefully whether the reducer model, , distance, ratio, input connecting method, output shaft structure, input and output shaft direction and revolving direction accord with requirement.
2.2 According to the requirement of selecting lubricant iol the product manual. Please fill proper category and brand lubricant and then screw on the vent-plug, unclock the small cone-plug of vent-plug. Omly after doing these, reducer is already for starting up running.